Roland TrueVIS VG2-540 - Media Feeding Is Not Smooth; Is some Other Object Coming into Contact with the Media; Is the Media too Thick; Are the Grit Rollers Dirty

Is some other object coming into contact with the media?
Make sure the media does not touch anything else. This may aect output, even when the feed appears to be
smooth.
RELATED LINKS
・ P. 30 "Setup of Roll Media"
・ P. 40 "Setup of Sheet Media"
Is the media too thick?
Media that is too thick may not only cause an unstable feed but may scrape the print heads, resulng in a malfunc-
on. Never use such media.
Are the grit rollers dirty?
Check to make sure the grit rollers are free of buildup of foreign material such as media scraps.
RELATED LINKS
・ P. 223 "Cleaning the Machine"
Media Feeding Is Not Smooth
286 3. Media Feed Problems