Roland TrueVIS VG2-540 - Loading and Outputting a Preset

Loading and Outpung a Preset
This loads a saved preset from among the eight types of presets. If you load a preset while [SETUP] is lit, [SETUP]
ashes. Aer that, when the setup operaon is complete, [SETUP] returns to being lit.
Procedure
1. Press [MENU].
2. Press [▼] to display the screen shown below.
MENU
PRESET
3. Press [▶], then [▼][▶] to display the screen shown below.
LOAD
NAME1
4. Select the preset that you want to load.
(1) Press [▲] or [▼] to select the name of the preset you want to load.
(2) Press [ENTER] to conrm your entry.
5. Press [MENU] to go back to the original screen.
Using Presets
192 2. Optimizing Work Efficiency