Roland TrueVIS VG2-540 - Using Media that Wrinkles Easily;Does Not Move Smoothly

Using Media That Wrinkles Easily/Does Not Move Smoothly
The platen uses sucon to grip the media and keep it stable. The sucon force can be adjusted corresponding to
the nature and condion of the media.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
SUB MENU
VACUUM POWER
4. Press [▶] to display the screen shown below.
VACUUM POWER
AUTO AUTO
5. Press [▲] or [▼] to select a value.
0 to 100% When the media is imsy and cannot move smoothly, decreasing this value (reducing the sucon force) may correct the
problem.
AUTO The sucon force is automacally adjusted to the opmal level for the media width
6. Press [ENTER] to conrm your entry.
7. Press [MENU] to go back to the original screen.
MEMO
• Default seng: "AUTO"
• Depending on the soware RIP you are using, you can also make this seng in the soware RIP. When you have made the
seng in the soware RIP, the machine's seng is ignored.
Configuring Settings to Match the Properties of the Media
148 1. Optimizing the Output Quality