Roland TrueVIS VG2-540 - Time for Wiper Replace; Set Cl-Liquid for Wiper; Change Cl-Liquid for Wiper; Time for Tray Cleaning

Aer verifying the message, press [ENTER], and then perform manual cleaning.
RELATED LINKS
・ P. 235 "Manual Cleaning"
TIME FOR WIPER REPLACE
It is me to replace the wipers..
Aer verifying the message, press [ENTER], and then replace the wiper.
RELATED LINKS
・ P. 256 "Replacing the Wiper and the Tray Pad"
SET CL-LIQUID FOR WIPER
No TR2 cleaning liquid pouch has been inserted.
Quickly insert a TR2 cleaning liquid pouch.
RELATED LINKS
・ P. 58 "TR2 Cleaning Liquid Pouch Replacement"
CHANGE CL-LIQUID FOR WIPER
The TR2 cleaning liquid pouch is empty.
Quickly replace it with a new TR2 cleaning liquid pouch.
RELATED LINKS
・ P. 58 "TR2 Cleaning Liquid Pouch Replacement"
TIME FOR TRAY CLEANING
It is me to clean the wiper tray.
Aer verifying the message, press [ENTER]. Clean the wiper tray, and then replace the tray pads.
RELATED LINKS
・ P. 256 "Replacing the Wiper and the Tray Pad"
・ P. 259 "Cleaning the Wiper Tray"
HEAD PROTECTION ACTIVATED
The ink in use may not be a product specied by Roland DG Corporaon.
To clear the message, press [ENTER]. To obtain opmal performance, we recommend that you use ink specied by
Roland DG Corporaon. To purchase ink, contact your authorized Roland DG Corporaon dealer.
Messages
5. Messages on the Operation Panel 299