Roland TrueVIS VG2-540 - Other Useful Functions; Using the Print Light (Interior Light)

Using the Print Light (Interior Light)
You can select the status of the light that shines on the platen.
Procedure
1. Press [FUNCTION].
2. Press [▲] to display the screen shown below.
FUNCTION
PRINT LIGHT
3. Press [▶] to display the screen shown below.
PRINT LIGHT
AUTO AUTO
4. Press [▲] or [▼] to select the status of the print light.
PRINT LIGHT
AUTO ON
"AUTO" The light is turned on/o automacally according to the status of the printer.
"ON" The light is on at all mes.
"OFF" The light is o at all mes.
5. Press [ENTER] to conrm your entry.
6. Press [MENU] to go back to the original screen.
MEMO
• Default seng: "AUTO"
Other Useful Functions
202 2. Optimizing Work Efficiency