Roland TrueVIS VG2-540 - Reducing Output Time; Speeding up Output for Narrow Media

Speeding Up Output for Narrow Media
This shortens output me by reducing the width of head movement to the minimum necessary. This is eecve
when the width of the media or the output data is narrow.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶] once, and then press [▼] several mes to display the screen shown below.
SUB MENU
FULL WIDTH S
4. Press [▶] to display the screen shown below.
FULL WIDTH S
FULL FULL
5. Press [▲] or [▼] to select "SHEET" or "OFF".
FULL WIDTH S
FULL OFF
"SHEET"
"SHEET" matches the range of print head movement to the width of the media.
"OFF" "OFF" matches the range of print head movement to the output data. Movement is limited to the
minimum amount necessary, and this can be expected to yield the fastest output. Note, however,
that because the speed of media movement is no longer constant, colors may be uneven.
"FULL" "FULL" makes the speed of media movement constant at all mes and produces the most stable
prinng result.
6. Press [ENTER] to conrm your entry.
7. Press [MENU] to go back to the original screen.
MEMO
• Default seng: FULL
Reducing Output Time
2. Optimizing Work Efficiency 195