Roland TrueVIS VG2-540 - When Normal Cleaning Is Not Effective; Medium Cleaning Method

Medium Cleaning Method
The print heads are important components that discharge ink. They require periodic and appropriate mainte-
nance. When problems such as dot drop-out are not resolved by normal cleaning (Prinng Tests and Normal Cleaning(P.
228)), perform the more forceful "medium cleaning" to remove clogging from the print heads.
IMPORTANT
Medium cleaning consumes more ink than normal cleaning, and overly frequent use may damage the print heads themselves. Avoid
performing this operaon more than necessary.
Procedure
1. Load the media.
2. Press [FUNCTION].
3. Press [▼], then [▶] to display the screen shown below.
CLEANING
TEST PRINT
4. Press [ENTER].
A test paern is printed.
5. Press [▼] several mes to display the screen shown below.
CLEANING
MEDIUM CL.
6. Press [▶] to display the screen shown below.
MEDIUM CL.
AB
7. Check for the group with dot drop-out or dot displacement by viewing the results of the prinng test.
The space from "A" to "B" is group A. The space from "B" to the right side is group B.
MEMO
If the prinng-test results are dicult to interpret
Check the results in a bright locaon, changing your line of vision. It is visible using the reecon of the light.
8. Select the group of print heads to clean.
(1) Press [◀] or [▶] to select the group of print heads that is not to be cleaned.
MEDIUM CL.
AB
(2) Press [▲] or [▼] to get rid of the group display.
When Normal Cleaning Is Not Effective
2. Regular maintenance 231