Roland TrueVIS VG2-540 - If the Discharged Fluid Disposal Message Appears

If the Discharged Fluid Disposal Message Appears
The message shown below appears when a certain amount of discharged uid has collected in the bole. If this
message appears, dispose of the discharged uid.
EMPTY
DRAIN BOTTLE
Procedure
1. When the following message appears, press [ENTER].
EMPTY
DRAIN BOTTLE
2. When the screen shown below appears, remove the drain bole and discard the discharged uid.
NOW EMPTY?
[YES] NO
CAUTION
Before you detach the drain bole, be sure to wait for the screen to display "NOW
EMPTY?" Aer discarding the discharged uid, promptly aach the drain bole to
the machine.
Failing to follow this procedure may cause discharged uid to ow out of the tube and spill, soiling
your hands or the oor.
IMPORTANT
When you remove the drain bole, a few drops of discharged uid may come out of the machine. Exercise cauon to prevent
this uid from soiling your hands or the oor.
3. Quickly aach the emped drain bole to the machine once more.
4. Press [◀] or [▶] to select "YES".
NOW EMPTY?
[YES] NO
5. Press [ENTER] to conrm your entry.
The display returns to the original screen.
MEMO
If you did not discard the discharged uid and selected [NO]
The display also returns to the original screen if you did not discard the discharged uid and selected [NO] In this case the
[EMPTY DRAIN BOTTLE] message disappears temporarily. The message appears again once a certain amount of discharged uid
has collected.
CAUTION
Before you detach the drain bole, be sure to wait for the screen to display "NOW
EMPTY?"
Repeatedly selecng "NO" without discarding the discharged uid may cause it to spill out of the
drain bole, soiling your hands or the oor.
Disposing of Discharged Fluid
226 2. Regular maintenance