Roland TrueVIS VG2-540 - Performing Printing Tests Arranged Horizontally

Performing Prinng Tests Arranged Horizontally
When performing prinng tests successively, you can select "SCAN" (vercal prinng) or "FEED" (horizontal print-
ing) as the print posion for the 2nd and later tests in comparison to the 1st test.
If you are using the oponal media take-up unit, test prints will be printed with the "SCAN" orientaon regardless
of this seng.
Procedure
1. Press [MENU].
2. Press [▼] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [▶], then [▲] to display the screen shown below.
SUB MENU
TEST PRINT POS
4. Press [▶] to display the screen shown below.
TEST PRINT POS
SCAN SCAN
5. Press [▲] or [▼] to select "SCAN".
TEST PRINT POS
SCAN FEED
6. Press [ENTER] to conrm your entry.
7. Press [ENTER] to go back to the original screen.
MEMO
Default seng: "FEED"
Other Useful Functions
2. Optimizing Work Efficiency 203