Roland TrueVIS VG2-540 - Daily Print Head Checks; Printing Tests and Normal Cleaning

No. Name Funcon overview
Blade protector This is the path that the blade takes during cung. It protects the
p of the blade.
Platen This is the path over which the media passes. A sucon fan that
keeps the media from coming loose and a print heater that helps
x the ink are built in.
Apron This has a built-in dryer to speed up drying of the ink.
Wipers Cleans the print heads during automac cleaning and in similar sit-
uaons.
Wiper tray This tray houses the TR2 cleaning liquid used to clean the wiper. It
contains a tray pad.
Serious Errors Indicated by the Print Light
If an error that may lead to serious damage to the printer occurs, the print light blinks.
This indicates one of the situaons shown below.
When the print light blinks, the error also appears on the operaon panel's display screen. Check the display
screen, and then respond to the error according to the informaon in Error Messages(P. 300) in this manual.
Display Screen Error overview
AVOIDING DRY-UP TURN POWER OFF The print heads were about to dry out. The print heads may be dam-
aged if allowed to dry out.
MOTOR ERROR: TURN POWER OFF An excessive load was applied to the motor. If this error is not ad-
dressed, the print heads may be damaged.
TEMPERATURE IS TOO LOW **°C The ambient temperature in the printer's installaon locaon has fall-
en below the temperature in which operaon is possible. If this error
is not addressed, the printer may malfuncon.
TEMPERATURE IS TOO HIGH **°C The ambient temperature in the printer's installaon locaon has ris-
en above the temperature in which operaon is possible. If this error
is not addressed, the printer may malfuncon.
CANCELED FOR PUMP PROTECTION An excessive load was applied to the pump within the machine. If this
error is not addressed, the pump may malfuncon.
SERVICE CALL **** An unrecoverable error or an error that requires a part replacement
has occurred.
If a Cover Opens during Operaon
If the front cover, le cover, or right cover (hereinaer referred to as "cover") opens during an output operaon or
while seng up the media, the machine makes an emergency stop. When an emergency stop occurs, a message
prompng you to close the cover appears on the screen. Close the covers as directed in the instrucons shown on
the screen.
When the cover is closed, you will be able to connue the operaon.
If you cannot connue the operaon even aer you close the cover, a nonrecoverable error may have occurred.
Refer to Error Messages(P. 300) for details.
Part Names and Functions
14 1. Basic Information