Roland TrueVIS VG2-540 - Page 254

2. Liming Print Heads Used for Prinng
Procedure
1. Start VersaWorks.
2. Click [Printer] - [Printer Sengs].
The [Printer Sengs] dialog box appears.
3. From the [Printer List], select the printer whose print heads will be limited.
4. Click [Advanced].
The [Advanced] dialog box appears.
5. Select the nozzle group to use in prinng from the prinng-test results.
6. Click [OK].
Close the [Advanced] dialog box.
7. Click [OK].
Close the [Printer Sengs] dialog box.
The icon is displayed on top of the image of the printer whose seng has been changed.
Handling Severe Dot Drop-out and Dot Displacement
3. Advanced Maintenance 253