Doing so may cause re.
CAUTION
To store discharged uid temporarily, place it in the included drain bole or in a du-
rable sealed container such as a metal can or polyethylene tank, and cap the
container ghtly.
Any spillage or vapor leakage may cause re, odor, or physical distress.
IMPORTANT
Dispose of discharged uid properly, in accordance with the laws in eect in your locale.
Discharged uid is ammable and contains toxic ingredients. Never aempt to incinerate discharged uid or discard it with
ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the
environment.
8. Quickly aach the emped drain bole to the machine once more.
9. Open the right cover.
10. Replace the tray pad.
IMPORTANT
Place the tray pad with an orientaon that matches the shape of the wiper tray. If you place the tray pad with the incorrect
orientaon, it will not be possible to clean the wiper correctly.
11. Close the right cover.
12. Press [ENTER].
The screen shown below appears, and then the machine is lled with TR2 cleaning liquid. The (approximate)
remaining me for the procedure is displayed on the screen. (The display shown below is an example.
"01:45" = "1 minute and 45 seconds")
FILLING LIQUID
>>>>> 01:40
If the TR2 cleaning liquid runs out during lling, the screen shown below appears. Replace the TR2 cleaning
liquid pouch. When you replace the wiper cleaning liquid pouch, the display returns to the original screen.
P. 58「TR2 Cleaning Liquid Pouch Replacement」
CHANGE CL-LIQUID
FOR WIPER
When the following screen is displayed again, the wiper tray cleaning is nished.
Replacing Parts for Maintenance
260 4. Replacing Consumable Parts
To Next Page
Loading...
