9. Install a new knife.
Slide the knife to align it with the groove (
). The knife is secured in place by the magnet ( ).
10. Slowly insert the knife into the groove.
11. Loosen the screw.
Take care to ensure that the knife does not slip out of posion at this me.
12. Close the front cover.
13. Press [ENTER].
When the following screen is displayed again, the blade replacement is nished.
14. Press [MENU] to go back to the original screen.
Replacing the Blade/Separating Knife
270 4. Replacing Consumable Parts
To Next Page
Loading...
