Roland TrueVIS VG2-540 - Page 33

IMPORTANT
Posion the le media holder correctly.
If the posion of the le media holder is incorrect, media may not be fed properly, which will have an adverse eect on the
prinng results. Use the following procedure to determine the appropriate posion.
Do not secure the media holders in place just yet.
In the following procedure, you will adjust the posions of the media holders before securing them in place. Do not secure
them in place just yet.
IMPORTANT
Do not touch the media holder adjuster.
The media holder adjuster is an important part that adjusts the posion of the media. When this machine is installed, a suitably
qualied worker performs an opmal adjustment that matches the installaon environment. Changing the adjusted posion of
the media holder adjuster may lead to the media feeding at an angle or other adverse eects.
If you change the media holder adjuster posion by mistake, contact your authorized Roland DG Corporaon dealer.
: Media holder adjuster
Setup of Media
32 2. Basic Operations