Roland TrueVIS VG2-540 - Page 58

5. Gently shake the new ink pouch.
During storage, the ink components may have precipitated. When replacing an ink pouch, gently shake the
new ink pouch to mix its contents before seng the ink pouch in the tray.
IMPORTANT
Never reuse an ink pouch when the machine shows a sign indicang no ink.
Occasionally the machine will show a sign indicang no ink even if there is a small amount of ink remaining in the pouch, but
nevertheless do not use it. Such an ink pouch is in a state where drawing ink from it is impossible. Using it in such a state may
force air into the ink path and cause printer malfuncons.
6. Set the pouch tray in the ink slot.
Insert the ink tray as far as it will go.
IMPORTANT
• Do not insert empty pouch trays. Doing so may force air into the ink path and cause printer malfuncons.
• Check the color names indicated on the ink slots and the ink pouches to set all the pouch trays in their correct posions.
Insert the pouch trays as far as they will go.
7. Close the ink slot cover.
Ink Pouch/TR2 Cleaning Liquid Pouch Replacement
2. Basic Operations 57