118 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Programming Straight Percentage Tax Rates and Status (v1.019 or later)
4. Turn the control lock to the PGM position.
5. If the tax is a percentage rate, with a decimal. (0.000-99.999). It is not necessary
to enter preceding zeros. For example, for 6%, enter 06.000 or 6.000.
6. For the type of tax:
If the tax is a percentage added to the sale (normal add on tax),
enter:
0
If the tax is a percentage value added tax (VAT; calculated as part of
the sale), enter:
2
4. Enter 0 here for all taxes, unless if you are programming tax 4 as a Canadian
GST. If tax 4 is a Canadian GST, enter the sum of the options below:
OPTION VALUE = SUM
GST (tax 4) is taxable by rate 1? Yes = 1
No = 0
GST (tax 4) is taxable by rate 2? Yes = 2
No = 0
GST (tax 4) is taxable by rate 3? Yes = 4
No = 0
8. Enter the number (1-4) of the tax you are programming.
9. Press the TAX 1 key.
10. Press the CASH key to end programming.
Tax Rate Programming Flowchart
. TAX 1
Tax Rate
You must enter decimal
GST
tax
Info
Tax
type
CASH
Tax#
(1-4)
To Next Page
Loading...
