LAN Connection for Static
IP
Environment
The procedures to set
up
the network using a static
IP
address are described below.
You
have to manually enter the
IP
address, subnet mask, gateway, and DNS that are provided
by
your Internet Service Provider (ISP).
The LAN
Port
on the Wall
...
[1]
LAN
Cable
You
can
connect
the
LAN
via a Sharer (Router).
TV Rear Panel
1.
Connect the LAN
port
on
the rear
panel
of
the TV
and the LAN port
on
the wall using
the LAN cable.
The LAN Port
on
the Wall
LAN
Cable
IP
Sharer
LAN Cable
TV Rear Panel
- The terminals (the position
of
the port and the type) of the external device may differ depending
on
the manufacturer.
"...
If you are using a static
IP
address, your ISP will inform you of the
IP
address, subnet mask, gateway, and DNS.
You
must enter these values to complete the network settings. If you do not know the values, ask your network
administrator.
~
For the information on how to configure and connect a Sharer (Router), refer to the owner's manual for the
corresponding product.
~
You
can connect the TV to the LAN directly without connecting
it
through a Sharer (Router).
"...
If you use
an
IP
Sharer (IP Router) that supports DHCP, you can set up the device
as
either DHCP or static
IP.
;,-.
For the procedures to use a static
IP
address, ask your Internet Service Provider.
To Next Page
Loading...
