Samsung 950 - About Anynet; What Is Anynet; Connecting Anynet+ Devices

About Anynet+
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV's remote.
Connecting Anynet+ Devices
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there
is an Anynet+ logo on it.
To connect to a TV
TV Rear Panel
HDMI1.3 Cable
HDMI1.3 Cable
HDMI 1.3 Cable
•
Anynet+ Device 4Anynet+ Device 3Anynet+ Device 2Anynet+ Device 1
Connect the [HOMI 1], [HOMI 2], [HOMI 3] or [HOMI 4] jack on the TV and the HOMI OUT jack of the corresponding Anynet+
device using an HOM cable.
To connect to Home Theater
Connect the
[HOMI 1], [HOMI
2], [HOMI 3] or
[HOMI4] jack on
the
TV and the
HOMI OUT jack of
the corresponding
Anynet+ device
using
an HOMI
cable.
Connect the
HOM I IN jack of
the home theater
and the HOMI
OUT jack of the
corresponding
Anynet+ device
using
an HOMI
cable.
2.
1.
Anynet+ Device 4
G ~. J
8
L~~
III
i<=j
HOMI 1.3 Cable
Anynet+ Device 3
r: ~: !
eJ
Anynet+ Device 2
~~.1
A
~·0
:;r;;
HDMI 1.3 CableT
Anynet+ Device 1
Home Theater
_~l Iif§il"...:;~~~
- ... r----J?~ ._-
,.rr ~ lJii 1:
0
;
~~.. ii 'I~' ~.
HDMI1.3 Cable ~ I [HOMI1.3 Cable yr
Optical Cable ,
TV Rear Panel
............., .
. .
. .
> Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the
Home Theater.
> When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack
on the OVO/Blu-Ray player or Cable/Satellite Box (ie Anynet Device 1 or 2)
directly to the Amplifier or Home Theater, not the TV.
> Connect only one Home Theater.
]:> You can connect an Anynet+ device using the HOMI 1.3 cable. Some HOMI cables may not support Anynet+ functions.
]:> Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
]:> Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.