Securing
the
TV
to
the
Wall
Caution: Pulling, pushing, or climbing
on
the TV may cause the TV to fall.
In
particular, ensure your children
do
nol
hang over or destabilize the
TV;
doing so may cause the TV to tip
over,
causing serious injuries or death. Follow
all safety precautions provided
on
the included Safety
Flyer.
For added stability, installihe anti-fall device for safety
purposes, as follows.
To
secure
the
TV:
1.
Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
,.,..
You
may need additional material such as an anchor depending on
the type
of
wall.
,.,..
Since the necessary clamps, screws, and string are not supplied,
please purchase them separately.
2.
Remove the screws from the center back
of
the
TV,
put the screws into
the clamps, and then fasten the screws onto the TV again.
,.,..
Screws may not be supplied with the product.
In
this case, please
purchase the screws
of
the following specifications.
Screw Specifications
- For a
17
- 29 Inch
LCD
TV:
M4
X 15
- For a
32
- 40 Inch
LCD
TV:
M6
X 15
3.
Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable.
,.,..
Install the TV near to the wall so that it does not fall backwards.
,.,..
It
is
safe to connect the cable so that the clamps fixed on the wall are
equal to or lower than the clamps fixed on the
TV.
,.,..
Remove the cable before moving the
TV.
4.
Verify all connections are properly secured. Periodically check
connections for any sign
of
fatigue or failure. If you have any doubt
about the security
of
your connections,contact a professional installer.
Wall
To Next Page
Loading...
