t
~_~t!ing~_~~~~_~t~
__
--
-------
-
_.
------
---
The following settings help set the Anynet+ functions
To
use the Anynet+ Function, Anynet+ (HDMI-CEC) must
be
set
to
On
1.
Press the MENU button Press
the'"
or
...
button to select "Application",
then press the ENTER
G'
button.
2.
Press
the'"
or
...
button
to
select "Anynet+ (HDMI-CEC)", then press the
ENTER
G'
button
3.
Press
the'"
or button to select "Setup", then press the ENTER
G'
button.
4.
Press
the'"
or button
to
select "Anynet+ (HDMI-CEC)", then press the
ENTER
G'
button
5.
Press
the'"
or
...
button
to
select "On", then press the ENTER
G'
button.
- The "Anynet+ (HDMI-CEC)" function
is
enabled.
If you select Off. "Anynet+ (HDMI-CEC)"
is
disabled.
.- When the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+
related operations are deactivated.
Setting
an
Anynet+ Device
to
turn Off Automatically when the TV
is
Turned Off
1.
Press
the'"
or
...
button
to
select "Auto Turn Off', then press the ENTER
G'
button
2.
Press
the'"
or
...
button to select "Yes", then press the ENTER
G'
button.
-..
The "Auto Turn Off' function
is
enabled
- If you select "No". the "Auto Turn Off' function
is
canceled.
Press the EXIT button
to
exit
The active source
on
the TV remote must
be
set to TV to use the Anynet+
function
If you set "Auto Turn Off'
to
"Yes", connected external devices are also turned
off when the TV
is
turned off If
an
external device is still recording.
it
mayor
may not turn off
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ENTER [3' button
to
select "Anynet+ (HDMI-CEC)"
- The Anynet+ (HDMI-CEC) menus appear
on
the screen.
English.
132
To Next Page
Loading...
