SatLab SLT2 - Page 138

Total Station Manual
-
137
-
C: Input the name of known
point and press [F4](
↓
) to shift
to subscript function, then press
[F3](Find) to find whether the
point is in memory, if exist, then
press [F4](OK) to be selected for
calculating; if not exist, then
need to input or measure the
point.
Input point
name
+
[F4]
+
[F1]
+
[F4]
C: Input the name of the point and
find whether it is in memory.
D: Press [F2] (List) in [Find Pt.]
screen, use the key [▲]\[▼] to
select a known point in the
point list for traverse calculation,
then press [F4](OK) to be
selected.
[F2]
+
[F4]
D: Select the point by list in the
instrument.
E: Press [F3](Coord.) to input a
known point that not exist in
memory.
[F3]
+
Input point
name
coordinate+
[F4]
E: Input the point through
keyboard.
※ In above operation, press [ESC] to return to previous menu.
 Orthogonal stakeout