SATO s84ex - Page 231

223
Parameter
Item
Description
l
Not used
00H: fixed
m
Initial feed
00H: Disable (Default)
01H: Enable
n
Proportional Pitch
00H: Disable
01H: Enable (Default) with international model
o
Label height (dots)
[S84-ex]
Head density
Range (HEX)
Range (DEC)
8dots/mm
(203 dpi)
0001H - 4E20H
1 - 20000 dots
12dots/mm
(305 dpi)
0001H - 4650H
1 - 18000 dots
24dots/mm
(609 dpi)
0001H - 2580H
1 - 9600 dots
[S86-ex]
Head density
Range (HEX)
Range (DEC)
8dots/mm
(203 dpi)
0001H - 2708H
1 - 9992 dots
12dots/mm
(305 dpi)
0001H – 3A8CH
1 - 14988 dots
p
Label width (dots)
[S84-ex]
Head density
Range (HEX)
Range (DEC)
8dots/mm
(203 dpi)
0001H - 340H
1 - 832 dots
12dots/mm
(305 dpi)
0001H - 4E0H
1 - 1248 dots
24dots/mm
(609 dpi)
0001H - 9C0H
1 - 2496 dots
[S86-ex]
Head density
Range (HEX)
Range (DEC)
8dots/mm
(203 dpi)
0001H – 53CH
1 - 1340 dots
12dots/mm
(305 dpi)
0001H – 7DAH
1 - 2010 dots
q
Vertical offset value (dots)
"0000H - 0318H" (0 - 792) (Default: 0)
"FFFFH - FCE8H" (-1 - -792)
r
Horizontal offset value (dots)
"0000H - 0318H" (0 - 792) (Default: 0)
"FFFFH - FCE8H" (-1 - -792)
s
Not used
00H: fixed
t
Time to LCD power saving (in minute)
"00H - 0FH" (0 - 15) Default: 00H (0)
u
Not used
00H: fixed
v
Not used
00H: fixed
w
Not used
00H: fixed
x
Not used
00H: fixed
y
Buzzer setting
00H: None
01H: Low
02H: Medium (Default)
03H: High
Refer to the “Operator Manual” for the default.