SATO s84ex - Page 337

329
4) Item status request command
Upon receive of this command, the printer will search the specified item No. from the end of the history buffer, and return
the status of appropriate item.
[Command]
SOH (HEX 01H) + ENQ (HEX 05H)
[Format]
STX + SOH + ENQ + aaaaa + ETX
●Parameter
a
"Item No."
Valid range :
00000 - 99999
*****
1. The parameter should be always 5 digits.
2. The parameter "*" is "HEX 2AH".
3. When "*****" is specified as the parameter, the status of the last item in the history buffer will be returned to the
host...
[Return status format]
(LEGACY STATUS setting is enabled with LAN (Port3 (9100)), Wireless LAN (Port1 (1024), and Port3 (9100)) )
[4]
Size
00000016H
[1]
STX
[5]
Specified
Item No.
[2]
Specified item
Status
*1
[5]
Currently
processed
Item No.
[2]
Currently processed item
Status
*2
[6]
Currently processed item
Number of prints
[1]
ETX
[Return status format] (Other than above stated interface)
[1]
STX
[5]
Specified
Item No.
[2]
Specified item
Status
*1
[5]
Currently
processed
Item No.
[2]
Currently processed
item Status
*2
[6]
Currently processed item
Number of prints
[1]
ETX
The numbers in the [ ] are the used bytes, and the return status format will be 22 bytes (fixed).
The item No. will be filled with 0.
The currently processed item No. will be space (20h) after print completion.
*1 The below is the specified item status list
Description
ASCII
HEX
Received
00
3030
Printed
01
3031
Cancellation
02
3032
Item No. error
03
3033
BCC error
04
3034
Print after error (this is a temporary error and this will be "Printed" after printing)
05
3035
Cancel after error
06
3036
Analyzed item with no print
07
3037
Unprocessed error (printer power has been off before processing the item)
08
3038
Others
**
2A2A
STX (HEX 02H)
ETX (HEX 03H)