SATO s84ex - Page 338

330
*2 The first digit is the status and the second digit is the error in the currently processed item status.
The below is the currently processed item status list.
Digit
position
Description
ASCII
HEX
1
Offline
0
30
Online, waiting for receive
1
31
Online, printing
2
32
Online, standby (waiting for dispensing)
3
33
Online, analyzing/editing
* The "number of currently processed item" may not be set due to the timing.
4
34
Error
5
35
Print pause (when received DLE command)
6
36
Digit
position
Description
ASCII
HEX
2
No error
0
30
Ribbon near end *
1
31
Buffer near full
2
32
Ribbon near end * & buffer near full
3
33
Label near end
4
34
Battery near end & ribbon near end*
5
35
Ribbon near end & buffer near full
6
36
Battery near end & ribbon near end* & buffer near full
7
37
Machine error
A
41
Flash ROM error
B
42
Head Open
C
43
Paper end
D
44
Ribbon end *
E
45
Sensor error
F
46
Head error
G
47
Memory read/write error (Cartridge read/write error)
H
48
Memory full (Cartridge full)
I
49
(Unused) Cutter error
J
4A
Calendar error
K
4B
Kanji data error (Kanji ROM error)
L
4C
(Unused) Internal rewind full
M
4D
(Unused) Cutter bracket open error
N
4E
RFID Tag error
O
4F
RFID protect error
P
50
BCC error
Q
51
Item No. error
R
52
Media error (print skip error)
S
53
(Unused) Ribbon core non-lock error
T
54
Other errors
U
55
Cover open
V
56
(Unused) Barcode read/verification error
V
56
(Unused) Barcode reader connection error
W
57
* There is no ribbon end or ribbon near end with the direct thermal model.
[Examples]
(1) STX SOH ENQ 00001 ETX
(2) STX SOH ENQ ***** ETX
[Supplemental explanation]
1. This command shall not be used during sending other data such as print data. The status may not be returned or print
may not be finished correctly when sending this command during print data sending.
2. Upon reception of this command, the printer will search the specified item from the history buffer, and it may take some
time to return the status to the host.
3. Item No. that is not sent as the print data shall not be specified as the parameter of this command. The status will not be
returned. The status will not be returned when the specifying an illegal item No. The control of item No. shall be done at
the host.
4. The latest item status will be returned when there are multiple same item No. in the history buffer.