6 Maintenance
161
SG112-ex Operator Manual
2 Open the top cover .
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3 Pull the head release lever forward to
unlock the print head.
4 Lift up the print head assembly to the
maximum.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
5 Remove the media, carbon ribbon and
make the print head visible.
To Next Page
Loading...
