SATO SG112-ex - Page 164

6 Maintenance
162
SG112-ex Operator Manual
6 Clean the dirt on the print head  using
a cotton swab/cloth dabbed with cleaning
liquid.
7 Clean the dirt on the platen roller 
using a cotton swab/cloth dabbed with
cleaning liquid.
Rotate the roller to clean the entire roller.
8 Clean the dirt on the media sensor
window using a cotton swab/cloth
dabbed with cleaning liquid.
9 Lift up and remove the media lid  that
is covering the feed roller.
10 Dab the cleaning liquid on the cotton swab/
cloth, and wipe off the dirt from the feed
roller  and the upper nip roller  .
4
5
6
7
9
8