SATO SG112-ex - Page 97

4 Operation and Configuration
95
SG112-ex Operator Manual
IPv4 GATEWAY ADR
Set the IPv4 gateway address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 000.000.000.000 for LAN.
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
IPv6 RESOLUTION
Select IPv6 address setting method.
The options are as follows:
• AUTO
• MANUAL
• DHCP
Note
• Shows only if the LAN interface is selected.
• The setting will be effective only if you power on the product again.
IPv6 ADDRESS
Set the IPv6 address.
Note
Shows only if the LAN interface is selected and “MANUAL” is selected at
“IPv6 RESOLUTION” screen.
PREFIX LENGTH
Set the prefix length.
The setting range is from 000 to 128.
Note
Shows only if the LAN interface is selected and “MANUAL” is selected at
“IPv6 RESOLUTION” screen.
'+&3
,3Y5(62/87,21
$872
0$18$/