Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
5
Input/output (I/O) modules
5-75
Analogue input modules with electricaly isolation
Programming
Classic: For programming the modules, an FBox is available.
xx7 and RIOs: the rmware reads in the values according to the conguration
(I/O Builder or network congurator)
Watchdog: This module can be used on all base addresses; there is no interaction
with the watchdog on the CPUs. For details, please refer to the “Watchdog”
section, which describes the correct use of the watchdog in conjunction with PCD2
components.
To Next Page
Loading...
