SBC PCD1 Series User Manual

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
5
Input/output (I/O) modules
5-29
Digital output modules
5.4.4 PCD2.A465, 16 digital outputs, for 0.5 A each
Application
Low cost output module with 16 transistor outputs 5 … 500 mA, with short-circuit
protection. The individual circuits are electrically connected; the voltage range is
10 … 32 VDC.
Technical data
Number of outputs: 16, electrically connected
Output current: 5 … 500 mA (leakage current max. 0,1 mA)
Within the voltage range 10 … 24 VDC, the load resistance
should be at least 48 Ω
Short circuit protection yes
Total current per module: 8 A on 100 % duty cycle
Operating mode: Source operation (positive switching)
Voltage range: 10 … 32 VDC, smoothed, max. 10 % residual ripple
Voltage drop: max. 0.3 V at 0.5 A
Output delay: typically 50 µs, max. 100 µs for resistive load
Resistance to interference:
acc. to IEC 801-4
4 kV under direct coupling
2 kV under capacitive coupling (whole trunk group)
Internal current consumption:
(from +5 V bus)
max 74 mA (all outputs = “1”)
typically 40 mA
Internal current consumption:
(from V+ bus)
0 mA
External current consumption: Load current
Terminals: Spring terminal connection (not pluggable), for wires up to
max. 0.5 mm
2
(1 × AWG 20)
LEDs and connection terminals
Bus connector
Bus interface
Recovery diodes
LEDs (3 colour)
Screwless terminals
Quad output driver
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
15 14 13 12 11 10 19 18 17 16 9 8 7 6 5 4 3 2 1 0

SBC PCD1 Series Specifications

General

Brand	SBC
Model	PCD1 Series
Category	Controller
Language	English