To Next Page

To Previous Page

Saia-Burgess Controls AG

Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26

System cables and adapters

System cables with I/O module connections to the Saia PCD

6-1

6 System cables and adapters

6.1 System cables with I/O module connections to the Saia PCD

The route to easy, fast connection is via these precongured cables. The connector

is ready mounted at the Saia PCD

end of the cable, so it just has to be plugged in to

connect. At the process end there are ribbon connectors to the terminal adapters or

the relay interface, or 0.5 mm

or 0.25 mm

strands, numbered and colour-coded.

All the cables are described in the manual 26-792 connection system

Questions and Answers:

Need help?

Do you have a question about the SBC PCD1 Series and is the answer not in the manual?

SBC PCD1 Series Specifications

General