SBC PCD1 Series - 5.19 Motion control modules for servo-motors

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
5
Input/output (I/O) modules
5-122
Motion control modules for servo-motors
5.19 Motion control modules for servo-motors
PCD2.H310
Motion control module for servo-motors, 1-axis encoder, 24 V
PCD2.H311
Motion control module for servo-motors, 1-axis encoder, 5 V
PCD2.H320
Motion control module for servo-drives, 2-axis with 24 V encoder
PCD2.H322
Motion control module for servo-drives, 1-axis with 24 V encoder
(slave operation)
PCD2.H325
Motion control module for servo-drives, 2-axis with 5 V and SSI
absolute value encoder
PCD2.H327
Motion control module for servo-drives, 1-axis with 5 V encoder
and SSI absolute value encoder (slave operation)
I/O modules and I/O terminal blocks may only be plugged in and removed when the
Saia PCD
®
and the external +24 V are disconnected from the power supply.