SBC PCD1 Series User Manual

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
Appendix
A-1
Icons
A
A Appendix
A.1 Icons
In manuals, this symbol refers the reader to further information in this manual or other
manuals or technical information documents.
As a rule there is no direct link to such documents.
This symbol warns the reader of the risk to components from electrostatic discharges
caused by touch.
Recommendation: Before coming into contact with electrical components, you should
at least touch the Minus of the system (cabinet of PGU connector). It is better to use a
grounding wrist strap with its cable permanently attached to the Minus of the system.
This sign accompanies instructions that must always be followed.
Explanations beside this sign are valid only for the Saia PCD
®
Classic series.
Explanations beside this sign are valid only for the Saia PCD
®
xx7 series.

SBC PCD1 Series Specifications

General

Brand	SBC
Model	PCD1 Series
Category	Controller
Language	English