Chapter 6: Using the Background Menu
Diagnostics Menu
126 Scantron OpScan 4ES and iNSIGHT 4ES Scanners
Diagnostics Menu
The Diagnostics menu is the third of three submenus
in the background menu. In it, you will find programs
that allow you to test the printer, the Select Stacker,
the top and bottom read heads, as well as the bar
code reader. See below for a full description of each
menu item.
NOTE: See “Background Menu Flowchart” on
page 104 for a flowchart of the entire background
menu.
Diagnostics Menu
Shown For All models, all modes
Description This menu item allows you to enter the Diagnostics
menu.
Press Enter to enter the Diagnostics menu.
Press Next to advance to the Background Menu menu
item.
Feed/Print?
Shown For All models, all modes
Description This menu item allows you to test the scanner’s feed
and print capabilities. The test feeds sheets loaded in
the input tray, and, if printing is on, the installed
printer(s) print a string of characters.
To Next Page
