Chapter 2: Setting Up Your Scanner
Uninstalling Scanner Utilities Software
32 Scantron OpScan 4ES and iNSIGHT 4ES Scanners
Uninstalling Scanner Utilities Software
NOTE: This step is not part of setup. It is included in
case you want to remove the drivers and scanner
utilities software from your PC (e.g. if you move the
scanner to a different computer).
If you want to uninstall the drivers and scanner utilities
software, use the following procedure:
1. Before uninstalling the software, close all programs
and turn off the scanner.
2. Open the Control Panel and access the list of
programs. Wait for the list to populate.
3. Select the Scantron scanner utilities you have
installed on your computer, and click Uninstall.
A message appears asking you to confirm that
remove the selected application and all of its
features.
4. Click Yes.
5. Click Finish when the uninstall is complete.
To Next Page
Loading...