Chapter 2: Setting Up Your Scanner
Installing Scanner Utilities Software
24 Scantron OpScan 4ES and iNSIGHT 4ES Scanners
Installing Scanner Utilities Software
NOTE: If your scanner is equipped with SelfScore
mode and you will be using it only in that mode,
you do not need to install software.
IMPORTANT: Before connecting your scanner to the
computer and turning it on, install the drivers and
utilities software on the host computer as
described below.
1. Insert the scanner utilities CD into the CD-ROM
drive of your computer.
2. Browse to your CD-ROM drive.
3. Double-click the setup.exe file to run the setup
program.
4. Follow the on-screen instructions to install the
drivers and scanner utilities appropriate for your
computer.
5. Click Finish when setup is complete.
To Next Page
Loading...