Scantron OpScan 4ES - Chapter 8: Cleaning the Scanner

Chapter 6: Using the Background Menu
Utilities Menu
Operator’s Guide 123
Quit to complete communications configuration and
to exit the Comm Configuration submenu.
Comm Config - Display
Variables Where <Scanner Model>=
• ES/ScanMark
Description This menu item allows you to display the
communications configuration.
Press Next to skip this function and to advance to the
next menu item.
Press Display if you want the scanner to display each
of the communications parameters on the display
panel. There are a total of 5 parameters.
Press Show Next to show the next parameter.
Press Next at any time to abort the function and
advance to the next menu item in this menu.
Display Brightness
Shown For All models, all modes
Description This menu item allows you to adjust the display
brightness.
Press Next to advance to the next menu item.