Chapter 7: ES/ScanMark Emulation
Set Up, Configure, and Operate the Scanner
138 Scantron OpScan 4ES and iNSIGHT 4ES Scanners
Set Up, Configure, and Operate the Scanner
Setup and operation of your scanner in ES/ScanMark
mode is the same as for other operating modes. Refer
to the following chapters for instructions on setting
up, configuring, and operating your scanner.
• Chapter 2, “Setting Up Your Scanner”
• Chapter 6, “Using the Background Menu”
• Chapter 3, “Operating Your Scanner”
To Next Page
