Operator’s Guide 169
Appendix B:
Transport Printer
This chapter covers setting up and using the optional
transport printer(s) for the OpScan 4ES and iNSIGHT
4ES scanners.
Both single and dual printers are available.
IMPORTANT: Remove the cartridge from the printer
and store in a sealed container in a cool place if:
• The printer is not going to be used for a period
greater than two weeks.
• The scanner is going to be transported.
• The scanner is going to be turned off or
unplugged (It is not necessary to remove the
cartridge when allowing the scanner to go into
low power sleep mode.).
B
In this chapter:
Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . page 170
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . page 171
Installing or Replacing Ink Cartridges . . . . . . . page 172
Positioning the Printer(s) . . . . . . . . . . . . . . . . . page 175
Turning the Printer(s) On Or Off . . . . . . . . . . page 179
Testing the Printer(s) . . . . . . . . . . . . . . . . . . . . page 181
Set Up Scanning Software for Printing . . . . . . page 183
Cleaning the Cartridge Holder . . . . . . . . . . . . . page 184
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . page 186
To Next Page
Loading...