Chapter 6: Using the Background Menu
Utilities Menu
Operator’s Guide 113
Utilities Menu
The Utilities menu is the second of three submenus in
the background menu. In it, you will find utility
programs that allow you to calibrate the read head(s),
view and set communications parameters, adjust the
display brightness, turn on and off the leading edge
skew check, and adjust the printer offset. See below
for a full description of each menu item.
NOTE: Scantron recommends powering on the
scanner for 10 minutes prior to running any
calibration program.
NOTE: See “Background Menu Flowchart” on
page 104 for a flowchart of the entire background
menu items.
Utilities
Shown For All models, all modes
Description This menu item allows you to enter the Utilities menu.
Press Enter to enter the Utilities menu.
Press Next to advance to the Diagnostics menu (See
“Diagnostics Menu” on page 126.)
Top Head Calibrate
Shown For All models, all modes
To Next Page
