Chapter : Select Stacker
Cleaning the Select Stacker
216
Scantron OpScan 4ES and iNSIGHT 4ES Scanners
Cleaning the Select Stacker
Cleaning the Select Stacker helps ensure trouble-free
operation. Use the following guidelines when cleaning
the Select Stacker.
Schedule
In general, it is best to clean your select stacker when
you clean your scanner - about once a month. If you
scan an extremely large number of sheets, scan sheets
made of lower quality paper, or you get error
messages, you may need to clean more often.
Supplies
We recommend the following supplies for cleaning the
Select Stacker:
•Lint-free cloths
• Static-reducing spray
• Canned air (with a non-condensing propellant)
To Next Page