Scantron OpScan 4ES - Chapter 7 Es;Scanmark Emulation

Operator’s Guide 135
Chapter 7:
ES/ScanMark Emulation
Running the scanner in ES/ScanMark mode makes the
scanner function like a Scantron ES 2010, ES 2260, or
ES 2800 scanner so that you can use your legacy
Scantron software and applications with your new
scanner. You can even create new form definitions with
your legacy software. Most of the instructions found in
this manual still pertain when using the scanner in ES/
ScanMark mode. This chapter highlights the
differences.
7
In this chapter:
Selecting ES/ScanMark Mode . . . . . . . . . . . . . page 136
Set Up, Configure, and Operate the Scanner. . page 138
Display Panel Messages . . . . . . . . . . . . . . . . . . page 139
Detecting Double Sheets . . . . . . . . . . . . . . . . . page 140
Form Handling . . . . . . . . . . . . . . . . . . . . . . . . . page 141
Scoring Forms . . . . . . . . . . . . . . . . . . . . . . . . . . page 142