Secutron MMX Series User Manual

134
Using the Web Server
The Network Node Info appears on the right.
Figure 86 Web Services
4. Type the static IP address, subnet mask and default gateway. Each node on the TCP/IP
network requires its own IP (Internet Protocol) address. The IP address must be unique
to the node and it must not be used by any other device on the TCP/IP network.
If you need assistance, contact your network administrator.
5. Type a Username and Password in the appropriate fields.
6. Click Enable under Web Services.
7. Click the Activate Web Services button. You must have a CodeMeter key inserted in
the computer.
8. Click Yes to transfer a Web Services license from your CodeMeter key to the
Configurator, and then click OK in the Web Services Licence Imported window, and
then click OK in the UnitCounter window.
9. Check Supervise Ethernet Connection if necessary. This will create a trouble event if
the node does not detect an Ethernet connection.
10. Click Panel > Send Job to send the job to the Fire Alarm Control Panel.
Note: Your organization has a certain number of Web Services licenses. You can use
only one Web Services license per job.
i

Secutron MMX Series Specifications

General

Brand	Secutron
Model	MMX Series
Category	Control Panel
Language	English