116
Digital Messages
16.2 Clips and Nested Loops
Each clip is part of a loop. The loop is marked by the words Repeat Count and the curved
arrow. Clips are marked by a speaker icon.
The Audio Message Composer lets you create nested loops. If one loop is nested inside
another, then the inside loop will play a specified number of times for every time the outside
loop plays.
You can make up to 4 levels of nesting.
You can move a clip up or down within a loop, but you cannot move a clip outside a loop. For
this reason, create the loop first, then import the clip into the loop.
Figure 74 Clips and nested loops
To create a loop
1. Select the loop that you want the new loop to be part of. If the new loop is not part of
another loop, select Composition.
2. Click Add Loop.
To import a clip into a loop
1. Select the loop that you want to import the clip into.
2. Select the clip in the Audio Clips list and click the >> button to move the clip to the
Audio Message list.
To specify the number of times a loop should play
• Select the loop, and then type the number of times to repeat it in the Repeat Count
field.
Note: When you move a clip to the Audio Message list, it is placed into the selected
loop.
Loop
Clip
Loop
Loop
Clip
Loop
Clip
To Next Page
Loading...
Need help?
General
