175
Using the Configurator
To see the Audio Controller Details
• Select an audio controller in the Job Tree.
Figure 125 Audio Controller Details
Tag Type a description for the audio controller. This will appear
in the Job Tree.
CPU Number Select the CPU address for the audio controller.
QMB-5000 in Bin 0 Select this check box if the amplifier bin arrangement is
that of the QMB-5000. The legacy QMB-5000 has seven
amplifier slots. If this check box is not selected, the
Configurator assumes that the QMB-5000N is used. The
QMB-5000N has only four amplifier slots. During
conversion from QMB-5000N to QMB-5000, any existing
amplifiers in expansion bins are re-arranged to first fill the
additional bins of the QMB-5000. During conversion from
QMB-5000 to QMB-5000N, any existing amplifiers in the
base unit's extra slots are moved to the expansion bins.
QBC-5000 Charger in use Select this check box if the amplifier battery charger is a
legacy QBC-5000. Otherwise, the Configurator assumes
that a QBC-5000N charger is in use. Selecting the wrong
charger can affect battery supervision and charging.
Silenceable Speakers Select this check box if the speakers connected to the
controller can be silenced.
To Next Page
Loading...
Need help?
General
