178
Using the Configurator
19.20 Advanced Panel Information
This window displays detailed information about the panel.
To view Advanced Panel Information
1. Click Panel > Connect.
2. Click Panel > Panel Information.
3. Click Advanced.
19.21 Backing up the Database
You can make a backup of the Configurator database. Back up your database often and store
it on a CD in a safe place.
To back up the database
1. Click File > Backup Database.
2. Click Save to save the backup in the Backup folder. The name of the backup file is in
the form YYYY-MM-DDV12-xx-xx.mdb.
Node The number assigned to each node.
CPU The number for each CPU on the node.
Type The type of CPU, for example a Main CPU, LCD Annuciator, Loop
Controller, or Audio Controller.
Version The version of the firmware on the CPU.
Language The language that the display uses for messages and menus.
System Type One of the following:
• Compact Build
• Large Build
HW Type Currently always BF_Base
HW Vers. Currently always V1.0.0
Status One of the following:
• Online
• Not responding
• Wrong type
• Unconfigured CPU
• Firmware version mismatch
• Address mismatch
• Offline trouble
Config Version
GUID
A number that uniquely identifies the active job on the FACP.
To Next Page
Loading...
