136
Using the Web Server
18.1.4 Web Browser Setup
Internet Explorer version 6 or later is recommended. You must configure it to not cache web
pages.
To set up the web browser
1. In the Internet Explorer 6 menu bar, click Tools, then click Internet Options.
The Internet Options window appears.
2. In the Browsing History section, click Settings.
The Temporary Internet Files and History Settings window appears.
3. Select Every time I visit the webpage, and then click OK.
18.1.5 Accessing the Web Server
To access the Web Server
1. In the browser’s address bar, type the IP address of the node, followed by /index.html.
For example, if the IP address is 192.168.0.1, then type
192.168.0.1/index.html
2. Press Enter.
A prompt to enter the user name and password appears.
3. Type the user name and password that you set up in section 18.1.2, and then press
Enter.
You can now use the Web Server to monitor the Fire Alarm Control Panel remotely.
18.2 Using the Web Server
The Web Server displays information about the function and operation of the MMX system. It
allows you to access the MMX system remotely for monitoring and troubleshooting.
To Next Page
Loading...
Need help?
General
