184
Using the Configurator
19.25 Creating a Job
To create a job
1. Click Job > New Job.
The Create Job window appears.
Figure 132 Create Job
2. Type a name for the job in the first field. This name should be unique. It will identify the
job throughout its lifetime.
3. Type a comment in the Comments field. This is required. This will become part of the
job's version history.
4. Select the model of panel in the Panel Model menu.
5. Select a template.
There are two copies of most template jobs, one for ULI and one for ULC. You can
change the template later.
There might be templates for more than one language. For panels with multiple CPUs,
this is the language of the main CPU.
6. Click Copy current job data to copy the current open job, and use this copy for the new
job.
7. Click OK.
Note: In a multi-product environment, the same job name cannot be used for jobs of
different products, even if you do not currently have access to all possible
products.
To Next Page
Loading...
Need help?
General
