146
Using the Configurator
When one or more input circuits are selected in the Details pane, then the Correlations pane
shows the output circuits they are correlated to.
19.4 Job Tree
The Job Tree lists the following items:
• Job Details
• Base I/O and associated Loops
• Main Display and associated Display Adders
• Common System Status
• Walk Test Areas
• Custom Timers
• Custom Intervals
• Equation Summary
• Input Summary
• Output Summary
Items representing the network nodes (for networkable products) and CPUs (for instance,
main display, loop controllers, and annunciators) are at the highest level. You can expand
these to show their sub-components, for instance, individual loops and display adders.
You can copy and paste items, and also drag and drop items, in the tree.
To Next Page
Loading...
