Secutron MMX Series

58
Walk Test
To view the results of the last walk test
1. Enter walk test mode from the command menu.
Figure 39 Enter walk test
2. Select 2 for walk test report.
Figure 40 Walk test menu
3. Select 1 for a printed report and 2 for a report on the display.
Figure 41 Walk test report options
The general information appears.
Figure 42 Walk test report
4. Use the UP and DOWN buttons to show individual devices in the walk test area. UP
selects the next device from the list and DOWN selects the previous device in the list.
Figure 43 Walk test device information
- Command Menu -
2 Bypass
ޚ
3 Walktest
4 Day/night mode
ޙ
- Walktest -
1 One Man
2 Walktest report
- Walktest -
1 Printer
2 Screen
Walktest 1st Floor
A:nnnn D:nnnn R:nnnn
T:nnnn D:nnnn R:nnnn
Press CANCEL to end
Nnn Lnn Adrnnnnnnnn
A:nnn T:nnn
Tag 1
Tag 2