Segger J-Link - Page 345

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
345
12.4.4.1 General tab
Connection to J-Link
This setting allows the user to configure how the DLL should connect to the J-Link.
Some J-Link models also come with an Ethernet interface which allows to use an
emulator remotely via TCP/IP connection.
License (J-Link RDI License managment)
1. The License button opens the J-Link RDI License management dialog. J-Link
RDI requires a valid license.
2. Click the
Add license button and enter your license. Confirm your input by click-